Transfer of Graphene CVD to Surface of Low Density Polyethylene (LDPE) and Poly(butylene adipate-co-terephthalate) (PBAT) Films: Effect on Biodegradation Process

Here, the influence of graphene as a coating on the biodegradation process for two different polymers is investigated, poly(butylene adipate-co-terephthalate) (PBAT) (biodegradable) and low-density polyethylene (LDPE) (non-biodegradable). Chemical vapor deposition graphene was transferred to the surface of two types of polymers using the Direct Dry Transfer technique. Polymer films, coated and uncoated with graphene, were buried in a maturated soil for up to 180 days. The films were analyzed before and after exposure to microorganisms in order to obtain information about the integrity of the graphene (Raman Spectroscopy), the biodegradation mechanism of the polymer (molecular weight and loss of weight), and surface changes of the films (atomic force microscopy and contact angle). The results prove that the graphene coating acted as a material to control the biodegradation process the PBAT underwent, while the LDPE covered by graphene only had changes in the surface properties of the film due to the accumulation of solid particles. Polymer films coated with graphene may allow the production of a material that can control the microbiological degradation, opening new possibilities in biodegradable polymer packaging. Regarding the possibility of graphene functionalization, the coating can also be selective for specific microorganisms attached to the surface.     

基于探索性数据分析的汉丰湖富营养化驱动因子研究

为了探究汉丰湖富营养化驱动因子和营养状况，基于2014年水质监测数据，应用探索性数据分析方法初步研究了汉丰湖水动力条件与环境因子的相关性、水质主成分、相关环境因子熵权和营养健康指数。回归分析结果表明：水位与透明度呈正相关，流量与DO呈负相关，与流速呈负相关的因子为Chla、CODMn、NH+4-N和DTP；主成分分析提取的3个主成分分别反映了营养盐、有机污染以及藻类信息；DO、TN和TP的熵权表明汉丰湖水体的富营养状况受制于耗氧有机污染和氮、磷营养盐；营养健康指数S1>S3>S6（湖心）>S7（湖尾）>S5（湖首）>S4>S2。汉丰湖水体营养状况介于中营养到轻富营养，其中南河营养状态较高，湖心营养程度高于湖首和湖尾。减少有机污染物、营养盐的输入和改善局部水域的水动力条件可抑制藻类生长，有利于防治富营养化。 关键词： 探索性数据分析；汉丰湖；富营养化；驱动因子；水动力条件；主成分；熵权；营养健康指数     

An integrated approach for assessing the migration behavior of chlorpyrifos and carbaryl in the unsaturated soil zone

Chlorpyrifos (O, O-diethyl O-3,5,6-trichloropyridin-2-yl phosphorothioate) and carbaryl (1-naphthyl methylcarbamate) are often applied concurrently as insecticides in food production. The aim of this study was to research their migration behavior in a real environment. We researched the leaching of both pesticides by setting up field lysimeters on a farm with the typical soil used in fruit production today. In order to analyze the variables involved in this process, we performed complementary adsorption studies, we performed complementary adsorption studies using batches and undisturbed soil laboratory columns for both compounds. The results for pesticide transport through the lysimeters showed that less than 1% of chlorpyrifos was recovered in the leachates, while almost 17% was recovered for carbaryl. Having completed the experiment in undisturbed laboratory columns, soil analysis showed that chlorpyrifos mainly remained in the first 5 cm, while carbaryl moved down to the lower sections. These results can be explained in view of the sorption coefficient values (K_D) obtained in horizons A and B for chlorpyrifos (393 and 184 L kg^?1) and carbaryl (3.1 and 4.2 L kg^?1), respectively. By integrating the results obtained in the different approaches, we were able to characterize the percolation modes of these pesticides in the soil matrix, thus contributing to the sustainable use of resources.     

南京典型站点春季大气颗粒物数谱分布特征

利用TSI公司的APS和SMPS系统,于2017年4月在江苏省环境监测中心点位连续一个月进行大气颗粒物数谱观测,结果表明,南京市春季典型月份大气颗粒物数浓度和体积浓度均值分别为1.64×104cm~(-3)和1.65×106μm~3/m~3;核模态、爱根核膜态、积聚模态和粗粒子模态数浓度占比分别为22.72%,53.52%,23.72%和0.05%,体积浓度占比分别为0.01%,1.76%,55.82%和42.41%;颗粒物数浓度平均日变化呈现双峰结构;PM_(2.5)体积浓度和质量浓度具有高度相关性;存在明显的新生粒子事件,3~10 nm颗粒物数浓度小时均值短时7 500 cm~(-3)。     

异戊醇低压热解的同步辐射真空紫外光电离质谱研究

作为新兴生物燃料,大分子醇类燃料在低压下的火灾安全基础迫切需要得到深入研究。热解过程作为火灾过程的初始阶段直接控制着火过程,火灾中碳烟颗粒的产生也依赖于热解反应,因此可燃物的低压热解研究在其低压火灾基础研究中具有重要意义。利用同步辐射真空紫外光电离质谱方法研究了异戊醇在0.2atm下的流动反应器热解,探测到了20余种热解产物,包括烯丙基自由基和C_4H_8O、C_5H_8、C_6H_6等同分异构体,并测量了其摩尔分数。基于实验结果,对燃料分解路径和主要产物的生成及消耗路径进行了探讨。与本组之前正戊醇热解实验的对比表明,由于存在支链结构,异戊醇在热解中比正戊醇更容易产生戊烯、丁烯和丙烯,但更少地产生乙烯。此外,异戊醇在热解中能够生成更多的丙炔和丙二烯等环状化合物前驱体,令其苯和1,3-环戊二烯的生成量更高,表明异戊醇比正戊醇更易于生成多环芳烃和碳烟。     

4种营养元素对水华鱼腥藻和四尾栅藻增殖的影响

以水华鱼腥藻和四尾栅藻分别作为蓝藻,绿藻代表藻种,采用均匀设计实验方法(uniform design experimentation,UDE)设计藻类AGP实验。采用通径分析法(Path Analysis,PA)对氮、磷、铁和锰在不同藻种增殖过程中的影响程度进行分析。结果表明,4种营养元素对水华鱼腥藻增殖影响的决策排序为FeTNTPMn,微量金属元素铁是影响水华鱼腥藻(蓝藻)增殖的主要因素;对四尾栅藻增殖影响的决策排序为TNTPFeMn,常量元素是影响四尾栅藻(绿藻)增殖的主要因素。联合通径分析法和逐步二次方回归分析法(QRA)建立的数学模型,可用于预判藻增殖。     

酸碱度对生活垃圾焚烧厂沥滤液蒸发处理效果的影响

采用蒸发法处理城市生活垃圾焚烧厂垃圾沥滤液,着重考察了不同沥滤液初始pH值对蒸发去除COD和氨氮效果的影响,并采用GC-MS对蒸发冷凝液中有机物成分进行了分析鉴定.结果表明,生活垃圾沥滤液的初始pH对冷凝液中COD、氨氮含量及有机污染物分布产生了决定性的影响.沥滤液在酸性条件下(pH≤6)蒸发,随着pH的增加,冷凝液中COD的含量线性降低,而氨氮的含量线性增加.当沥滤液的初始pH值从6增加到11,冷凝液中COD的含量呈对数函数降低,而氨氮的含量表现出显著增加趋势.从冷凝液中鉴定出38种有机污染物,多为沸点较低的醇、酸、酚和酯类.在酸性条件下(pH=3),冷凝液中挥发性有机酸和低碳醇的相对丰度接近90％.在近中性条件下(pH=6.2),冷凝液中的有机污染物以酚、酸和杂环类化合物为主.在碱性条件下(pH =11),冷凝液中酚和杂环类化合物占比较高,而酸的含量极少.     

Validation of atmospheric aerosols parallel sampling in a multifold device

In this work, particulate matter was collected using an active sampling system consisting of a PM₁₀ (<10 μm) inlet coupled to a multifold device containing six channels, connected to a vacuum pump. Each channel was equipped with a filter holder fitted with adequately chosen filters. The system was fixed on a metallic structure, which was placed on the roof of the laboratory building, at the Faculty of Sciences, in Lisbon. Sampling took place under flow-controlled conditions. Aerosols were extracted from the filters with water, in defined conditions, and the water-soluble fraction was quantified by ion chromatography (IC) for the determination of inorganic anions (Cl^?, NO₃ ^? and SO₄ ^2?). Equivalent sampling through the various channels was validated. Validation was based on the metrological compatibility of the content results for the various filters. Ion masses are metrologically equivalent when their absolute difference is smaller than the respective expanded uncertainty. When this condition is verified, the studied multifold device produces equivalent samples.     

气相色谱-质谱法测定大气中98种挥发性有机物

通过色谱-质谱联用法(简称GC-MS),利用低温冷阱技术对大气中的VOCs进行浓缩富集,然后经过加热解吸分别至毛细管色谱柱和FID检测器及MS检测器,对大气中98种挥发性有机化合物(VOCs)进行分离、定性、定量测定。方法检出限为0.008×10-9~0.100×10-9(V/V);线性相关系数的平方值为0.992 7~1,相对标准偏差为4.0%~20.2%,总体标准偏差为0.154 2~0.952 1。     

Challenges for modelling and integrating environmental performances in concept design: the case of an automotive component lightweighting

The objective of this paper is to discuss the main barriers for modelling and integrating the environmental performances in the automotive concept design. Incorporating environmental assessment in the early design phase of a vehicle component is known as an important challenge that car makers need to face in order to develop more sustainable design solutions; in this regard, the Life Cycle Assessment is the most widespread methodology for the environmental assessment and comparison of alternatives. The present work illustrates the combination of such methodology with the traditional design procedure at two different levels of the component design phase, material choice and concept design. In particular, the potential benefits originated by a lightweight solution for the automotive component Throttle Body are evaluated by considering environmental and technical implications at the same level. The case study shows that a multi-disciplinary approach for design effectively allows the integration of the environmental issue in the company’s established procedures. However, interpretation of results is still a challenging aspect due to the inevitable contradicting elements which should not discourage to develop comprehensive sustainability assessment within the early design stage.